Supercritical CO2 Treatment to Modify Techno-Functional Properties of Proteins Extracted from Tomato Seeds.

Tomato seeds are a rich source of protein that can be utilized for various industrial food purposes. This study delves into the effects of using supercritical CO2 (scCO2) on the structure and techno-functional properties of proteins extracted from defatted tomato seeds. The defatted meal was obtained using hexane (TSMH) and scCO2 (TSMC), and proteins were extracted using water (PEWH and PEWC) and saline solution (PESH and PESC). The results showed that scCO2 treatment significantly improved the techno-functional properties of protein extracts, such as oil-holding capacity and foaming capacity (especially for PEWC). Moreover, emulsifying capacity and stability were enhanced for PEWC and PESC, ranging between 4.8 and 46.7% and 11.3 and 96.3%, respectively. This was made possible by the changes in helix structure content induced by scCO2 treatment, which increased for PEWC (5.2%) and decreased for PESC (8.0%). Additionally, 2D electrophoresis revealed that scCO2 hydrolyzed alkaline proteins in the extracts. These findings demonstrate the potential of scCO2 treatment in producing modified proteins for food applications.

Hernandulcin Production in Elicited Hairy Roots of Phyla scaberrima: Toward Sustainable Production of a Non-Caloric Sweetener with Nutraceutical Properties.

Herein we report on the generation of hairy root lines of P. scaberrima able to produce hernandulcin (HE), a non-caloric sweetener with nutraceutical properties. From ten different lines analyzed, three synthesized up to 100 mg ⋅ L-1 HE under the batch culture conditions standardized in this investigation. Adding elicitors (salicylic acid, chitin, Glucanex, polyethylene glycol) and biosynthetic precursors (farnesol and (+)-epi-alpha-bisabolol) significantly altered HE accumulation. Chitin and Glucanex enhanced HE production from 130 to 160 mg ⋅ L-1 , whereas farnesol and (+)-epi-alpha-bisabolol from 165 to 200 mg ⋅ L-1 without dependence on biomass accumulation. Improved batch cultures containing liquid Murashige & Skoog medium (MS; pH 7), added with 4 % sucrose, 0.5 mg ⋅ L-1 naphthaleneacetic acid, 100 mg ⋅ L-1 Glucanex, 150 mg ⋅ L-1 chitin, 250 mg ⋅ L-1 farnesol, and 150 mg ⋅ L-1 (+)-epi-alpha-bisabolol at 25 °C (12 h light/12 h darkness), triggered HE accumulation to 250 mg ⋅ L-1 in 25 days. The efficiency of each recombinant line is discussed.

Extraction methods and nutritional characterization of protein concentrates obtained from bean, chickpea, and corn discard grains.

Protein concentrates obtained from discarded grain flours of white chickpea Sinaloa (Cicer arietinum) (CC), "Azufrazin" bean (Phaseolus vulgaris) (BC), and white corn (Zea mays) (MC), were characterized biochemically through bromatological analyses (protein, lipid, fiber, moisture, ashes, and nitrogen free extract), HPLC techniques (amino acids content), and spectrophotometry (anti-nutrients: phytic acid, trypsin inhibitors, and saponins). The percentage of protein obtained from CC, BC, and MC was 71.23, 81.10, and 55.69%, respectively. Most peptides in the BC and CC flours had a molecular weight of <1.35 kDa, meanwhile, MC peptides were heavier (1.35 to 17 kDa). The amino acids (AA) profile of flours and protein concentrates were similar; however, all the protein concentrates showed an increased AA accumulation (300 to -400%) compared with their flours. The protein concentrates from BC registered the highest AA accumulation (77.4 g of AA/100 g of protein concentrates). Except for the phytic acid in CC and trypsin inhibitor in CC and MC, respectively, the rest of the protein concentrates exhibited higher amounts of the anti-nutrients compared with their flours; however, these levels do not exceed the reported toxicity for some animals, mainly when used in combination with other ingredients for feed formulations. It is concluded that CC and BC protein concentrates showed better nutritional characteristics than MC (level of protein, size of peptides, and AA profile). After biochemical characterization, protein concentrates derived from by-products have nutritional potential for the animal feed industry.

The potential use of acylglycerols on the thermal inactivation of lactic acid bacteria for the manufacture of long-life fermented products.

The effect of acylglycerols on the thermal inactivation of lactic acid bacteria used in the production of fermented products was studied. The starting point was the observation of an increase in thermal sensitivity in the presence of an emulsifier based on mono- and diacylglycerols in the culture medium. Analysis of the emulsifier showed that monoacylglycerols were the compounds responsible for this effect, with monopalmitin being the main contributor. Monostearin, on the other hand, showed significantly less potentiating effect. Interestingly, monoacylglycerols showed a greater bactericidal effect when used individually than when used in combination. On the other hand, the rate of thermal inactivation observed in reconstituted skim milk emulsions was lower than in peptone water emulsions, showing that the presence of proteins and colloidal particles increased the resistance of bacteria to heat treatment. With respect to pH values, a reduction in pH from 6.6 to 5.5 promoted an increase in the rate of thermal death. However, at pH = 5.5, the enhancing bactericidal effect was only detectable when the heat treatment was performed at low temperatures but not at high temperatures. This finding is of interest, since it will allow the design of moderate heat treatments, combining the use of temperature with the addition of acylglycerols, to prolong the shelf life of products fermented with lactic acid bacteria, and minimizing the destruction of desirable compounds that were obtained by the fermentation process.

Foaming and Structural Studies on the Acidic Subunit of Amaranth 11S Globulin Modified with Antihypertensive Peptides as a Function of pH and Ionic Strength.

Some studies aimed at revealing the relationship between protein structure and their functional properties. However, the majority of these reports have been carried out using protein isolates. There are limited reports on the possible relationship between the functional properties and the structure of a purified protein. In this work the amaranth 11S globulin acidic subunit (AAC) and five mutations of the same protein that were modified in their variable regions with antihypertensive peptides (VYVYVYVY and RIPP), were analyzed at two ionic strength (2.9 and 17.6 g/L NaCl) and pH (3.0-7.0). Results revealed better solubility for the proteins mutated at the terminal ends (AACM.1 and AACM.4) and lower solubility for the protein inserted with RIPP peptide. Spectroscopy studies revealed an increase of ß-sheet structure at high salt concentration for all proteins. It was also observed that salt concentration acted as a modulator, which allowed a better foam features for all modified proteins limiting movement of side chains and reducing red-shifted displacement of λmax. All proteins showed foam capacity ranging from 76 to 93% although foam stability was twofold better for modified proteins than for AAC at high salt concentration. This study allowed better understanding about the structural changes that influence the foaming properties of engineered proteins.

Effect of Chitosan Nanoparticles Incorporating Antioxidants from Salvia hispanica L. on the Amaranth Flour Films.

Research background: Amaranth (Amaranthus hypochondriacus) flour produces films with excellent barrier properties against water vapor, allowing food preservation, but the mechanical properties are poor compared to synthetic films. One strategy to improve these properties is the incorporation of nanoparticles. The particles can also serve as a vehicle for the addition of antioxidant agents into the films. The objective of this work is to optimize the formulation for the preparation of amaranth flour films treated with antioxidant chia (Salvia hispanica L.) extract-loaded chitosan particles using response surface methodology (RSM). Experimental approach: Chitosan nanoparticles with the extract were synthesized by ionic gelation, and the films were made by the casting method. Three independent variables were assigned: amaranth flour (4-6%), glycerol (25-35%) and chitosan nanoparticles loaded with the chia extract (0-0.75%). We then evaluated the physical (thickness), mechanical (tensile strength, Young´s modulus and elongation), barrier (water vapor permeability, moisture and water solubility) and antioxidant properties of the films. The experimental results of the properties were analyzed using a Box-Behnken experimental design generating 15 runs with three replicates at the central point. Results and conclusions: Second and third order polynomial models were obtained from the ANOVA analysis of the evaluated responses, and high coefficients of determination were found (0.91-1.0). The water vapor permeability of the films was 0.82-2.39·10-7 (g·mm)/(Pa·s·m2), tensile strength was 0.33-1.63 MPa and antioxidant activity 2.24-5.65%. The variables had different effects on the films: glycerol negatively affected their properties, and the permeability values increased with increased amaranth flour content. The nanoparticles improved the mechanical, barrier and antioxidant properties of the films compared to the films without nanosystems. The optimal formulation was 4% amaranth flour, 25% glycerol and 0.36% chitosan nanoparticles. The optimized films had better mechanical (1.62 MPa) properties, a low water vapor permeability value (0.91·10-7 (g·mm)/(Pa·s·m2)) and moderate antioxidant activity (6.43%). Novelty and scientific contribution: The results show the effect of chitosan nanoparticles on the properties of amaranth flour films for the first time. The resulting equations are useful in the design of food packaging.

Engineering Concanavalin B to Release Bioactive Peptides against Metabolic Syndrome.

Metabolic syndrome is a severe public health issue characterized by multiple metabolic disturbances. Current treatments prescribe a particular drug for each of them, producing multiple side effects. As a first step towards a more integral approach, we applied our recently described methodology to design single proteins, based in the Concanavalin B scaffold (1CNV), that contain several bioactive peptides (BPs), including antioxidant and lipid-lowering activities as well as inhibitors of dipeptidyl peptidase IV (DPPIV) and the angiotensin converting enzyme. Modified Concanavalin (CNV44), the designed protein that showed the best in silico properties, was expressed in high yields in E. coli and purified to homogeneity. After in vitro digestion with gastrointestinal enzymes, all the biological activities tested where higher in CNV44 when compared to the non-modified protein 1CNV, or to other previous reports. The results presented here represent the first in vitro evidence of a modified protein with the potential to treat metabolic syndrome and open the venue for the design of proteins to treat other non-communicable diseases.

Synthesis and Characterization of Chitosan Particles Loaded with Antioxidants Extracted from Chia (Salvia hispanica L.) Seeds.

Chia (Salvia hispanica L.) seeds contain antioxidants with great benefits for health and are widely used in the food industry. Antioxidants can be degraded by environmental factors, decreasing their biological activity. Their encapsulation in chitosan (CH) particles represents an alternative to protect them and increases their application. The encapsulation efficiency (%EE) of the antioxidants in the CH particles depends on the synthesis conditions. In this study, two methods for encapsulation of chia extract in chitosan particles were evaluated: method A, 0.05% CH in 1% acetic acid was mixed with 0.07% of tripolyphosphate (TPP) and method B, 0.3% CH in 2% acetic acid was mixed with 1% TPP. The results showed that the %EE decreased with the concentration of the extract, and the FTIR analysis suggested that the compounds of the extract were adsorbed on the surface of the particles. Dynamic light scattering and zeta potential analysis showed that the particles of method A are unstable and with a tendency to agglomerate, and the particles of method B are stable. The highest %EE was obtained with 0.2 mg·mL-1 (method A) and 1.0 mg·mL-1 (method B) of the extract. The higher loading capacity (%LC) (16-72%) was exhibited by the particles of method A. The best particle yield (62-69%) was observed for method B. The particles with the extract adsorbed showed antioxidant activity (5-60%) at 25°C; however, in the particles with the extract encapsulated, the activity increased after subjecting to acidic conditions at 40°C due to the breakdown of the particles. The results obtained will allow choosing the appropriate conditions for the synthesis of chitosan particles loaded with chia extracts with specific characteristics (%EE, %LC, size, and type) according to their future applications. The particles could be used in food and pharmaceutical industries and even in edible films for food packaging.

Identification of genuine and novel miRNAs in Amaranthus hypochondriacus from high-throughput sequencing data.

Amaranth has been proposed as an exceptional alternative for food security and climate change mitigation. Information about the distribution, abundance, or specificity of miRNAs in amaranth species is scare. Here, small RNAs from seedlings under control, drought, heat, and cold stress conditions of the Amaranthus hypocondriacus variety "Gabriela" were sequenced and miRNA loci identified in the amaranth genome using the ShortStack software. Fifty-three genuine miRNA clustersthirty-nine belonging to conserved families, and fourteen novel, were identified. Identification of their target genes suggests that conserved amaranth miRNAs are involved in growth and developmental processes, as well as stress responses. MiR0005, an amaranth-specific miRNA, exhibited an unusual high level of expression, akin to that of conserved miRNAs. Overall, our results broaden our knowledge regarding the distribution, abundance and expression of miRNAs in amaranth, providing the basis for future research on miRNAs and their functions in this important species.

Assessment of Techno-Functional and Nutraceutical Potential of Tomato (Solanum lycopersicum) Seed Meal.

Tomato (Solanum lycopersicum) is a widely consumed fruit all around the world. The industrial exploitation of tomato generates a lot of waste. Most of the utilization of tomato seeds waste is focused on animal feeding, as well as a food ingredient aimed to increase the protein content, and raw material for some organic bioactive component extraction. The aim of this work was to evaluate the techno-functional properties of tomato seed meal (TSM) and its nutraceutical properties after applying defatting processing (TSMD), and to evaluate the nutraceutical properties after a fermentation processing (TSMDF) by Lactobacillus sp. The results showed that, at alkaline conditions (pH 8-9), the techno-functional properties for TSM and TSMD improved. In comparison with TSM, TSMD showed higher water holding capacity (WHC ≈32%), higher oil holding capacity (OHC ≈13%), higher protein solubility (49-58%), more than 10 times foaming activity (FA), more than 50 times foam stability (Fst), as well as an improved emulsifying activity (EA) and emulsion stability (Est) wich were better at pH 9. Regarding the nutraceutical properties, after 48 h of fermentation (TSMDF), the antioxidant activity was doubled and a significant increase in the iron chelating activity was also observed. During the same fermentation time, the highest angiotensin-converting enzyme inhibition (ACEI) was achieved (IC50 73.6 µg/mL), more than 10 times higher than TSMD, which leads to suggest that this fermented medium may be a powerful antihypertensive. Therefore, the strategy proposed in this study could be an option for the exploitation of tomato wastes.

Moringa straw as cellulase production inducer and cellulolytic fungi source / Residuo de moringa como inductor de la producción de celulasas y como fuente de hongos celulolíticos

Abstract Currently, the valorization of agroindustrial waste is of great interest. Moringa oleifera is a multipurpose tree whose softwood residues could be used as raw material for low-cost cellulase production. The aim of this study was to isolate, identify, and characterize microorganisms with cellulolytic activity in different carbon sources. We isolated and puri-fied 42 microorganisms from M. oleifera biomass. Fungi presenting the largest hydrolytic halos in carboxymethylcellulose as a substrate were molecularly identified as Penicillium funiculosum (FG1), Fusarium verticillioides (FG3) and Cladosporium cladosporioides (FC2). The ability of these fungal strains to break down cellulose was assessed in a submerged fermentation using either amorphous CMC or crystalline form (Avicel). P. funiculosum and C. cladosporioides displayed similar endoglucanase (606 U/l) and exoglucanase (205 U/l) activities in the Avicel-containing medium, whereas F. verticillioides showed the highest level of p-glucosidase activity (664 U/l) in the carboxymethylcellulose medium. In addition, the effect of three culture media (A, B, and C) on cellulase production was evaluated in P. funiculosum using moringa straw as a carbon source. The results showed a volumetric productivity improvement of cellulases that was 2.77-, 8.26-, and 2.30-fold higher for endoglucanase, exoglucanase and p-glucosidase, respectively when medium C containing moringa straw was used as a carbon source. The enzymatic extracts produced by these fungi have biotechnological potential especially for second-generation bioethanol production (2G) from moringa straw. This is the first report on the use of M. oleifera biomass to induce the production of various cellulases in P. funiculosum. © 2019 Asociación Argentina de Microbiología. Published by Elsevier Espana, S.L.U. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0/).

Resumen Actualmente, la valorización de los residuos agroindustriales es de gran interés. En este trabajo se emplearon residuos de madera blanda de Moringa oleifera para la producción de celulasas de bajo costo. El objetivo fue aislar, identificar y caracterizar microorganismos con actividad celulolítica en diferentes fuentes de carbono. A partir de la biomasa de M. oleifera, se aislaron e identificaron 42 microorganismos productores de celulasas. Los hongos que presentaron los mayores halos de hidrólisis en carboximetilcelulosa como sustrato fueron identificados molecularmente como Penicillium funiculosum (FG1), Fusarium verticillioides (FG3) y Cladosporium cladosporioides (FC2). Mediante fermentación sumergida, se evaluó la capacidad de estas cepas en la producción de celulasas utilizando celulosa cristalina (Avicel) y amorfa (CMC) como fuentes de carbono. P. funiculosum y C. cladosporioides presentaron las mayores actividades de endoglucanasa (606 U/l) y exoglucanasa (205 U/l) en medio Avicel, mientras que F. verticillioides mostró la mayor actividad de p-glucosidasa (664 U/l) en medio CMC. Además, se evaluó el efecto de tres medios de cultivo (A, B y C) sobre la producción de celulasas en P. funiculosum empleando residuos de moringa como fuente de carbono. Los resultados mostraron que en el medio C, la productividad volumétrica de celulasas se incrementó en 2,77; 8,26 y 2,30 veces para las actividades de endoglucanasa, exoglucanasa y p-glucosidasa, respectivamente. Los extractos enzimáticos producidos tienen gran potencial para su utilización biotecnológica, especialmente en la sacarificación de residuos de moringa y la producción de bioetanol de segunda generación. Este es el primer estudio del uso de la biomasa de M. oleifera para inducir la producción de diversas celulasas en P. funiculosum.

Moringa straw as cellulase production inducer and cellulolytic fungi source.

Currently, the valorization of agroindustrial waste is of great interest. Moringa oleifera is a multipurpose tree whose softwood residues could be used as raw material for low-cost cellulase production. The aim of this study was to isolate, identify, and characterize microorganisms with cellulolytic activity in different carbon sources. We isolated and purified 42 microorganisms from M. oleifera biomass. Fungi presenting the largest hydrolytic halos in carboxymethylcellulose as a substrate were molecularly identified as Penicillium funiculosum (FG1), Fusarium verticillioides (FG3) and Cladosporium cladosporioides (FC2). The ability of these fungal strains to break down cellulose was assessed in a submerged fermentation using either amorphous CMC or crystalline form (Avicel). P. funiculosum and C. cladosporioides displayed similar endoglucanase (606U/l) and exoglucanase (205U/l) activities in the Avicel-containing medium, whereas F. verticillioides showed the highest level of ß-glucosidase activity (664U/l) in the carboxymethylcellulose medium. In addition, the effect of three culture media (A, B, and C) on cellulase production was evaluated in P. funiculosum using moringa straw as a carbon source. The results showed a volumetric productivity improvement of cellulases that was 2.77-, 8.26-, and 2.30-fold higher for endoglucanase, exoglucanase and ß-glucosidase, respectively when medium C containing moringa straw was used as a carbon source. The enzymatic extracts produced by these fungi have biotechnological potential especially for second-generation bioethanol production (2G) from moringa straw. This is the first report on the use of M. oleifera biomass to induce the production of various cellulases in P. funiculosum.

The insertion of bioactive peptides at the C-terminal end of an 11S globulin changes the structural stability and improves the antihypertensive activity

BACKGROUND: The 11S globulin from amaranth is the most abundant storage protein in mature seeds and is well recognized for its nutritional value. We used this globulin to engineer a new protein by adding a four valinetyrosine antihypertensive peptide at its C-terminal end to improve its functionality. The new protein was named AMR5 and expressed in the Escherichia coli BL21-CodonPlus(DE3)-RIL strain using a custom medium (F8PW) designed for this work. RESULTS: The alternative medium allowed for the production of 652 mg/L expressed protein at the flask level, mostly in an insoluble form, and this protein was subjected to in vitro refolding. The spectrometric analysis suggests that the protein adopts a ß/α structure with a small increment of α-helix conformation relative to the native amaranth 11S globulin. Thermal and urea denaturation experiments determined apparent Tm and C1/2 values of 50.4°C and 3.04 M, respectively, thus indicating that the antihypertensive peptide insertion destabilized the modified protein relative to the native one. AMR5 hydrolyzed by trypsin and chymotrypsin showed 14- and 1.3-fold stronger inhibitory activity against angiotensin I-converting enzyme (IC50 of 0.034 mg/mL) than the unmodified protein and the previously reported amaranth acidic subunit modified with antihypertensive peptides, respectively. CONCLUSION: The inserted peptide decreases the structural stability of amaranth 11S globulin and improves its antihypertensive activity.

Desiccation-induced viable but nonculturable state in Pseudomonas putida KT2440, a survival strategy.

The potential of Pseudomonas putida KT2440 to act as a plant-growth promoter or as a bioremediator of toxic compounds can be affected by desiccation. In the present work, the bacterial survival ratio (BSR) in response to air desiccation was evaluated for P. putida KT2440 in the presence of different protectors. The BSR in the presence of nonreducing disaccharides, such as trehalose, was high after 15 days of desiccation stress (occurring at 30°C and 50% relative humidity), whereas in the absence of a protector the bacterial counts diminished to nondetectable numbers (ca 2.8 log CFU/mL). The LIVE/DEAD staining method showed that bacteria protected with trehalose maintained increased numbers of green cells after desiccation while cells without protection were all observed to be red. This indicated that nonprotected bacteria had compromised membrane integrity. However, when nonprotected bacteria subjected to 18 days of desiccation stress were rehydrated for a short time with maize root exudates or for 48 h with water (prolonged rehydration), the bacterial counts were as high as that observed for those not subjected to desiccation stress, suggesting that the cells entered the viable but nonculturable (VBNC) state under desiccation and that they returned to a culturable state after those means of rehydration. Interestingly an increase in the green color intensity of cells that returned to a culturable state was observed using LIVE/DEAD staining method, indicating an improvement in their membrane integrity. Cellular activity in the VBNC state was determined. A GFP-tagged P. putida strain expressing GFP constitutively was subjected to desiccation. After 12 days of desiccation, the GFP-tagged strain lost culturability, but it exhibited active GFP expression, which in turn made the cells green. Furthermore, the expression of 16S rRNA, rpoN (housekeeping), mutL, mutS (encoding proteins from the mismatch repair complex), and oprH (encoding an outer membrane protein) were examined by RT-PCR. All evaluated genes were expressed by both types of cells, culturable and nonculturable, indicating active molecular processes during the VBNC state.

Insertions of antihypertensive peptides and their applications in pharmacy and functional foods.

Hypertension is a worldwide health problem. It is the main cardiovascular risk factor and affects about 31% of the world's adult population. The drugs used to control hypertension may cause side effects; for this reason, there are many investigations focused on searching for alternatives to control or prevent this disease through diet. For example, many peptides have demonstrated antihypertensive effects. The insertion of bioactive peptides is a biotechnological implement used to improve the nutraceutical properties of proteins. This work reviews the current data on the insertion of antihypertensive peptides (AHPs) into food proteins, the systems used to produce the AHPs, the advantages and disadvantages between them, the parameters to produce them at major scales, and their potential applications in pharmacy and functional foods.

Insertion of antihypertensive peptides in acidic subunit from amaranth 11S induces contrasting effects in stability.

The insertion of peptides is a biotechnology tool widely used to improve the nutraceutical properties of proteins. Because the effect of these insertions in protein stability and function is difficult to predict, it should be determined experimentally. In this study, we created two variants of amarantin acidic subunit and analyzed them along with other four proteins reported previously. We measured their response against two destabilizing agents: temperature and urea. The six proteins presented the insertion of antihypertensive peptides (VYVYVYVY or RIPP) in the variable regions of the protein. We observed that their effect strongly depended on the site of the insertion. The insertion in the variable region I stabilized the protein both thermally and chemically, but it affected the inhibitory activity of the angiotensin-converting enzyme in vitro. In contrast, insertions in other three regions were severely destabilizing, producing molten globules. Our findings reveal that the insertion of bioactive peptides in variable regions of a protein can increase or decrease the protein's thermal and chemical stability and that these conformational changes may also alter its final activity.

Expression, purification and thermal stability evaluation of an engineered amaranth protein expressed in Escherichia coli

Background: The acidic subunit of amarantin (AAC)-the predominant amaranth seed storage protein-has functional potential and its third variable region (VR) has been modified with antihypertensive peptides to improve this potential. Here, we modified the C-terminal in the fourth VR of AAC by inserting four VY antihypertensive peptides. This modified protein (AACM.4) was expressed in Escherichia coli. In addition, we also recombinantly expressed other derivatives of the amarantin protein. These include: unmodified amarantin acidic subunit (AAC); amarantin acidic subunit modified at the third VR with four VY peptides (AACM.3); and amarantin acidic subunit doubly modified, in the third VR with four VY peptides and in the fourth VR with the RIPP peptide (AACM.3.4). Results: E. coli BL21-CodonPlus (DE3)-RIL was the most favorable strain for the expression of proteins. After 6 h of induction, it showed the best recombinant protein titer. The AAC and AACM.4 were obtained at higher titers (0.56 g/L) while proteins modified in the third VR showed lower titers: 0.44 g/L and 0.33 g/L for AACM.3 and AACM.3.4, respectively. As these AAC variants were mostly expressed in an insoluble form, we applied a refolding protocol. This made it possible to obtain all proteins in soluble form. Modification of the VR 4 improves the thermal stability of amarantin acidic subunit; AAC manifested melting temperature (Tm) at 34°C and AACM.4 at 37.2°C. The AACM.3 and AACM.3.4 did not show transition curves. Conclusions: Modifications to the third VR affect the thermal stability of amarantin acidic subunit.

Overexpression of a modified protein from amaranth seed in Escherichia coli and effect of environmental conditions on the protein expression.

Amaranth seeds are considered as an excellent complementary source of food protein due to their balanced amino acid composition. Amarantin acidic subunit has the potential as a functional and nutraceutical protein, and it is structurally a good candidate for modification. The aim of this work was to improve its functionality, then the primary structure was modified into the third variable region of 11S globulins, by inserting antihypertensive peptides: four Val-Tyr in tandem and Arg-Ile-Pro-Pro in the C-terminal region. Modified protein was expressed in Escherichia coli Origami (DE3) and was purified. The culture conditions, including the culture media, temperature, agitation speed and air flow were tested in order to obtain an increased expression levels of the modified protein. A 2(3) factorial design was used for evaluate the effect of environmental conditions on modified protein production. The results indicated that the yield of modified protein could be increased by up 3-fold in bioreactor as compared with flask. In addition, the temperature, the agitation speed and the oxygen were significant factors on the expression of the antihypertensive protein. The maximum production was 99 mg protein-L(-1). The hydrolyzed protein showed a high inhibitory activity of the angiotensin converting enzyme (IC50=0.047 mg mL(-1)).

Modification of the amaranth 11S globulin storage protein to produce an inhibitory peptide of the angiotensin I converting enzyme, and its expression in Escherichia coli.

Amarantin is the predominant seed storage protein from amaranth. It shows a high content of essential amino acids, making this protein important from a nutritional viewpoint. The protein has two disulfide linked subunits: acidic and basic. Acidic subunit has the potential as a functional and nutraceutical protein, and it is structurally a good candidate for modification. In order to improve its functionality, the primary structure was modified in the third variable region of globulins 11S, by inserting four Val-Tyr antihypertensive peptides in tandem. The designed plasmid was expressed in Escherichia coli Origami (DE3) and then the expressed protein was purified. Mass spectrometry analysis was used to corroborate the identity of the protein by peptide mass fingerprinting; also, the modified peptide was fragmented and sequenced by mass spectrometry, corroborating thus the inserted residues. The hydrolyzed protein showed a high inhibitory activity of the angiotensin converting enzyme (IC(50) 0.064 mg ml(-1)); it was nearly eightfold more active than the nonmodified protein. In spite that the nonmodified subunit is less active, its activity is comparable with other hydrolyzed proteins reported as high active inhibitors. The expressed and purified subunit after its engineered modification, may be useful for preventing hypertension and for other medical purposes.

Expression and characterization of the acidic subunit from 11S Amaranth seed protein.

Amarantin acidic subunit has the potential to be employed as a functional and a nutraceutical protein. To evaluate both possibilities this protein was produced in recombinant Escherichia coli Origami (DE3) harboring the expression plasmid pET-AC6His. Three different expression factors were assayed: inductor concentration, temperature and time of the amarantin acidic subunit accumulation. The results indicated that a 0.3 mmol/L concentration of isopropyl-beta-D-thiogalactoside, at 37 degrees C and 6 h after induction were favorable for high expression of amarantin acidic subunit, mostly in the form of inclusion bodies. The protein was purified from soluble fraction by immobilized metal affinity chromatography, up to 30 mg amarantin acidic subunit/L Terrific broth culture were obtained. Sucrose density gradient ultracentrifugation analysis of the expressed soluble amarantin acidic subunit revealed that it was assembled in monomers. The expression of the amarantin acidic subunit, together with the one-step purification will facilitate further investigation of this storage protein through site-directed mutagenesis.